From: Sundstrom Michael (NMP-RD/Dallas)
Sent: Friday, July 18, 2003 7:34 AM
To: 'Garnier, David S (MED)'
Subject: RE: FCC's inquiry for broadband over the powerlines (BPL)
I'd say that the noise floor from 2 to 40 MHz is going to rise due to the
broad band noise that could be generated from the unshielded transmission
path. This is just a guess, after all; pumping power down unlimited length
antennas will probably radiate.
Michael Sundstrom
NOKIA
TCC Dallas / EMC
of: (972) 374-1462
cell: (817) 917-5021
amateur call: KB5UKT
From: ext Garnier, David S (MED) [mailto:[email protected]]
Sent: Thursday, July 17, 2003 6:38 PM
To: [email protected]
Subject: FCC's inquiry for broadband over the powerlines (BPL)
Hello,
I don't remember seeing any discussion on the listserve concerning
this...
As I understand this, this is a carrier current system, digital
modulation
format, frquencies ranging from 2 to 40 Mhz, amplitude limits of ~40 dB
to 60 dB above Class A conducted emission limits.
Anybody have any experiance or comments about this?
For further explanation see:
http://hraunfoss.fcc.gov/edocs_public/SilverStream/Pages/edocs.html
Use the search term: "broadband over power line"
thanks,
dave garnier
David Garnier
e GE Medical Systems
___________________________________________
David S. Garnier
Senior Technician
PET Engineering
3000 N. Grandview Ave - M/S W-1250
Waukesha, Wi. 53188
Tel: 262.312.7246
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
