I read in !emc-pstc that Sam Davis <[email protected]> wrote (in <[email protected]>) about 'Security Camera' on Fri, 9 Jan 2004:
>TestI've got a digital security camera, rated 12 Vdc, 24 Vac, going to >Europe. The EMC Directive is necessary, but it's out of the scope of the >LVD, because it's too low of voltage for the low voltage directive. For the >General Product Safety directive, what needs to be done? What standard >would apply? Even though the LVD doesn't apply, if you apply EN 60950 that would be a demonstration of due diligence as far as the GPSD is concerned. EN 60950 applies since it's a *security* camera, and the relevant CENELEC product committee chose that standard. But a camera for other purposes in a household context should meet EN 60065. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
