Group,
I am looking to source a DC current probe to measure steady state as well
as inrush currents for a modular chassis up to 100 Amps DC. My goal was to
find one that can be adapted for use with a digital multimeter as well as an
oscilloscope. I have found a few out there although the accuracy parameters
are falling a bit short (12-15% above 40 Amps). I would be interested in
looking at a number of solutions for those that have suggestions and any input
you may have regarding pricing, pros and cons of the product, etc.
Thx,
Joe
Joe Finlayson
Motorola Computer Group
120 Turnpike Street
Southborough, MA 01772
Tel: (508) 357-8273
Fax: (508) 357-8204
Email: <mailto:[email protected]>
[email protected]
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ieee-pses.org/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
