Joe,

The Tektronix TCP303 probe and TCPA300 Amplifier will do it. 150 amps
and DC to 15 MHz. 1% typical DC error. $3700 for system- not cheap but
it is good.

   Dave Cuthbert
   Micron Technology


From: [email protected]
[mailto:[email protected]] On Behalf Of Finlayson
Joseph-G3162C
Sent: Tuesday, February 17, 2004 6:54 AM
To: 'EMC PSTC'
Subject: DC Current Probes



Group,
 
    I am looking to source a DC current probe to measure steady state as
well as inrush currents for a modular chassis up to 100 Amps DC.  My
goal was to find one that can be adapted for use with a digital
multimeter as well as an oscilloscope.  I have found a few out there
although the accuracy parameters are falling a bit short (12-15% above
40 Amps).  I would be interested in looking at a number of solutions for
those that have suggestions and any input you may have regarding
pricing, pros and cons of the product, etc.
 
Thx,
 
 
Joe
 
Joe Finlayson
Motorola Computer Group
120 Turnpike Street
Southborough, MA 01772
Tel:   (508) 357-8273
Fax:  (508) 357-8204
Email:   <mailto:[email protected]>
[email protected]


This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ieee-pses.org/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc



This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ieee-pses.org/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to