Some suggestions for you. These are general suppliers that I am aware of. I used something from Chauvin a while ago which was dc coupled (hall effect), spec of 1 or 2%, multimeter connection.
Jon Francis Em: [email protected] Ph: +44 (0) 1235 861173 www.voltech.com www.flex-core.com www.crmagnetics.com www.chauvin-arnoux.com From: Finlayson Joseph-G3162C [mailto:[email protected]] Sent: 17 February 2004 13:54 To: 'EMC PSTC' Subject: DC Current Probes Group, I am looking to source a DC current probe to measure steady state as well as inrush currents for a modular chassis up to 100 Amps DC. My goal was to find one that can be adapted for use with a digital multimeter as well as an oscilloscope. I have found a few out there although the accuracy parameters are falling a bit short (12-15% above 40 Amps). I would be interested in looking at a number of solutions for those that have suggestions and any input you may have regarding pricing, pros and cons of the product, etc. Thx, Joe Joe Finlayson Motorola Computer Group 120 Turnpike Street Southborough, MA 01772 Tel: (508) 357-8273 Fax: (508) 357-8204 Email: <mailto:[email protected]> [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
