First convert the limit in Volts to micro Volts, then simply take the log of
that number and multiply by 20.

 Example:
1) to convert 1 Volt into dBuV
2) 1 Volt = 1,000,000uV
3) 20log 1,000,000 = 120dBuV

 To convert dBuv into Volts just work backwards. Divide 120(dBuV) by 20 (=
6) and take the antilog of that ( = 1Volt).

Bill

William M Stumpf
DLS Electronics
166 South Carter St.
Genoa City WI 53128
ph: 262-279-0210
fx: 262-279-3630
email: [email protected]


From: Kim Boll Jensen [mailto:[email protected]]
Sent: Thursday, February 12, 2004 5:13 AM
To: EMC PSTC
Subject: EN 55020 RF test



Hi all

In EN 55020 immunity to RF e.m. fields it is noted in 5.8.4 that for big
equipment not fitting in the TEM, test as per EN 61000-4-3 is permitted.

My problem is that immunity test levels in EN 55020 is in dB(uV/m) and EN
61000-4-3 is in v/m. How do I convert ?

Best regards,

Kim Boll Jensen
Bolls Rådgivning
Ved Gadekæret 11F
DK-3660 Stenløse

Tlf.:  48 18 35 66
Fax:   48 18 35 30
Mobil: 22 99 69 91

E-mail: [email protected]
web: www.bolls.dk




This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ieee-pses.org/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc



This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ieee-pses.org/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to