Jacob, I am also measuring BPL in the UK. We have an automatic Schaffner loop but it is too noisy to get any good measurments. We have some manual tuned loops designed by the University of Herts in the UK by a lecturer there called Dave Lauder http://dragon.herts.ac.uk/~eleqdml/ If you contact him he may give you the spec.
I would be interested to know what technique you will use. ie how do you propose to measure low signal levels in the near field. I am trying to obtain a sensitive E-field antenna to measure both E and H. I am doing a PHD and not complience measurement so I may have a different requirement to you. I would like to chat to you off-line in more detail if you are interested. Iain The Open University (UK) From: "Jacob Schanker" <[email protected]> To: "EMC-PSTC" <[email protected]> Sent: Wednesday, March 24, 2004 10:39 PM Subject: Shielded Loop Antenna for HF > > Fellow Groupees: :) > > I am looking for suggestions on sources of shielded loop antennas good to 30 > MHz. > > The usage will be for a study of radiation from a BPL (PLC) system. > > Any sources and recommendations, and anecdotal experiences, will be > appreciated. > > Thanks, > > Jack > > > Jacob Z. Schanker, P.E. > Consulting Engineer > 65 Crandon Way > Rochester, NY 14618 > > Tel: 585 442 3909 > Fax: 585 442 2182 > [email protected] > > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ieee-pses.org/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > > This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
