Surprised John W. did not mention magnetic fields from EN 55103-1 & 2
although the standard is for Professional Audio. 
Emissions-
Phenomena 2.   Enclosure port (for rack mount); magnetic fields, 50 Hz
to 50 kHz measured at 10 cm. Using basic Standard EN 55103-1 : 1996,
Annex A.  The Emission limits to be met are 50 Hz - 500 Hz  4 - 0.4 A/m
at 10 cm (The limit decreases linearly with the logarithm of the
frequency), and 500 Hz - 50 kHz  0.4 A/m at 10 cm.
Phenomena 3.  Enclosure port (for non-rack mount); magnetic fields, 50
Hz to 50 kHz measured at 1 m. Using basic Standard EN 55103-1 : 1996,
Annex A.  The Emission limits to be met are 50 Hz - 5 kHz  1 - 0.01 A/m
at 1 m (The limit decreases linearly with the logarithm of the
frequency), and 5 kHz - 50 kHz  0.4 A/m at 1 m.
Immunity-
Phenomena 3. enclosure port; magnetic fields, 50 Hz to 10 kHz. Using
basic Standard EN 55103-2 : 1996 see annex A.  The Immunity requirements
to be met are 3 - 0.03 A/m, 20 Hz to 5 kHz, 0.03 A/m, 5 kHz to 10 kHz
(homogeneous/pseudo homogeneous magnetic field decreasing linearly with
the logarithm of frequency from 50 Hz to 5 kHz and constant from 5 kHz
to 10 kHz).   Criterion to be applied A (the apparatus shall continue to
operate as intended).

Chuck McDowell
Meyer Sound Laboratories Inc.

Regards,

Chuck McDowell
Meyer Sound Laboratories Inc.


From: John Woodgate [mailto:[email protected]] 
Sent: Friday, March 05, 2004 12:08 PM
To: [email protected]
Subject: Re: Pace makers, speakers, magnetic fields


I read in !emc-pstc that Sosnoski, Michael <[email protected]>
wrote (in <[email protected]
om>) about 'Pace makers, speakers, magnetic fields' on Fri, 5 Mar 2004:

>I know speakers are part of the audio/video world, but IEC 60065 does 
>not go much into safe limits of sound pressure, and magnetic fields.
Can 
>anyone point me into some standards, text, or general safety 
>considerations with respect to loudspeakers?

IEC 60065 covers all the aspects of safety of loudspeakers per se that
can be quantified.  Safe limits of sound pressure depend very much
indeed on the environment and are covered by OSHA rules, or the
equivalent in other countries. The magnetic fields of loudspeakers are
of no significance in the context of safety, barring bizarre contrived
situations.
-- 
Regards, John Woodgate, OOO - Own Opinions Only. 
The good news is that nothing is compulsory.
The bad news is that everything is prohibited.
http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk 


This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ieee-pses.org/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc



This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ieee-pses.org/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to