Also. don't forget that the 60068 series of standards are just generic test
methods - just like the 61000-4-XX series of EMC standards.

----- Original Message ----- 
From: "John Lach" <[email protected]>
To: <[email protected]>; <[email protected]>; "Helge Knudsen"
<[email protected]>; <[email protected]>
Sent: Friday, March 05, 2004 2:21 PM
Subject: Re: IEC 68 Part 2-3


>
> Also just noticed that it has been superceded by IEC 60068-2-78
>
> John
>
> -- 
> John Lach
> Manager - Standards and Test
> Carling Technologies
> Ph: 860-793-7167
> Fax:860-747-8329
> www.carlingtech.com
>
> On 3/5/2004 8:49 AM, Helge Knudsen <[email protected]> wrote:
> >
> >Hello Bob,
> >
> >IEC 68-2-3 is the old number, you must add 60000 to the number, IEC
> >68-2-3
> >becomes IEC 60068-2-3.
> >In 1998 (as far as I renember) IEC changed the number system by adding
> >60000
> >to the number, one reason for doing this was to have same number
> >as CENELEC
> >on the standards.
> >
> >Best regards
> >
> >Helge Knudsen
> >Test & Approval
> >Niros Telecommunication
> >Hirsemarken 5
> >DK-3520 Farum
> >Tel +45 44 34 22 51
> >Fax +45 44 99 28 08
> >email [email protected]
> >
> >
> >-----Oprindelig meddelelse-----
> >Fra: [email protected] [mailto:[email protected]]
> >Sendt: 5. marts 2004 14:34
> >Til: [email protected]
> >Emne: IEC 68 Part 2-3
> >
> >
> >
> >
> >
> >
> >
> >Is anyone familiar with IEC 68 Part 2-3? Web searches only find
references
> >to it. I cannot find where
> >to order it from. The IEC website does not list it as an orderable
> >document.
> >
> >Bob Heller
> >Senior EMC Engineer
> >3M EMC Laboratory, 76-1-01
> >St. Paul, MN 55107-1208
> >Tel:  651- 778-6336
> >Fax:  651-778-6252
> >=======================================================
> >
> >
> >-------------------------------------------
> >This message is from the IEEE EMC Society Product Safety
> >Technical Committee emc-pstc discussion list.
> >
> >Visit our web site at:  http://www.ieee-pses.org/
> >
> >To cancel your subscription, send mail to:
> >     [email protected]
> >with the single line:
> >     unsubscribe emc-pstc
> >
> >For help, send mail to the list administrators:
> >     Ron Pickard:              [email protected]
> >     Dave Heald:               [email protected]
> >
> >For policy questions, send mail to:
> >     Richard Nute:           [email protected]
> >     Jim Bacher:             [email protected]
> >
> >All emc-pstc postings are archived and searchable on the web at:
> >    http://www.ieeecommunities.org/emc-pstc
> >
> >-------------------------------------------
> >This message is from the IEEE EMC Society Product Safety
> >Technical Committee emc-pstc discussion list.
> >
> >Visit our web site at:  http://www.ieee-pses.org/
> >
> >To cancel your subscription, send mail to:
> >     [email protected]
> >with the single line:
> >     unsubscribe emc-pstc
> >
> >For help, send mail to the list administrators:
> >     Ron Pickard:              [email protected]
> >     Dave Heald:               [email protected]
> >
> >For policy questions, send mail to:
> >     Richard Nute:           [email protected]
> >     Jim Bacher:             [email protected]
> >
> >All emc-pstc postings are archived and searchable on the web at:
> >    http://www.ieeecommunities.org/emc-pstc
> >
> >
>
>
>
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> Visit our web site at:  http://www.ieee-pses.org/
>
> To cancel your subscription, send mail to:
>      [email protected]
> with the single line:
>      unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
>      Ron Pickard:              [email protected]
>      Dave Heald:               [email protected]
>
> For policy questions, send mail to:
>      Richard Nute:           [email protected]
>      Jim Bacher:             [email protected]
>
> All emc-pstc postings are archived and searchable on the web at:
>     http://www.ieeecommunities.org/emc-pstc




This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ieee-pses.org/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to