Bob The equivalent British standard, BS2011: Part 2.1Ca: 1977, is available from: http://bsonline.techindex.co.uk/
There are only 4 pages, and it basically describes a damp heat, steady state test at 40 degC (+/- 2 degC) and 93% RH (+2/-3% RH) for 4, 10, 21, or 56 days. regards Charlie Blackham Approvals Manager Airspan Communications Ltd From: [email protected] [mailto:[email protected]]On Behalf Of [email protected] Sent: 05 March 2004 13:34 To: [email protected] Subject: IEC 68 Part 2-3 Is anyone familiar with IEC 68 Part 2-3? Web searches only find references to it. I cannot find where to order it from. The IEC website does not list it as an orderable document. Bob Heller Senior EMC Engineer 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 ======================================================= This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
