Hi Ken, I would like to pose the question slightly different.
Let's say I have an Information Technology Product (for example 230VAC 3A and say Unshielded Twisted Pair ports no telecom connection to outside lines), and I pick the EMC directive and the LVD for the product standards. How does one go from the EMC directive to the different 61000-4-x tests? I have not got a satisfactory answer from the test labs I have used. Ryan Jazz Jayasinghe Compliance Engineer x1198 Canoga Perkins Direct:(818) 678-3898 20600 Prairie Street Company:(818) 718-6300 Chatsworth, CA 91311-6008 e-mail: [email protected] www.canoga.com FAX:(818) 678-3798 -----Original Message----- From: [email protected] [ mailto:[email protected]]On Behalf Of Ken Javor Sent: Monday, May 03, 2004 7:29 PM To: '[email protected]' Subject: Re: What does the CE mark mean for EMC Thanks to all who responded. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
