I read in !emc-pstc that Tom Cokenias <[email protected]> wrote (in <p05210614bcbc5d0293c1@[10.10.10.104]>) about 'What does the CE mark mean for EMC' on Mon, 3 May 2004: >This information should be on the mfr's Declaration of Conformity for the >product.
It is not a requirement to list ALL the standards: the Basic Standards in the EN 61000-4 series are not often listed. Normally, the emission and immunity Product (Family) Standards are listed, together with EN 61000-3-2 and -3 or -11, as applicable. -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
