We had the old Schaffner NSG 432 which is not a very good gun and finally last
year I obtained the budget to purchase a new one. I demoed several models
including the new Schaffner, Keytek, Haefley, NoiseKen, and EM Test. The
decision was taken to purchase the EM Test (division of Amplifier Research).
The gun is easy to use, produces very repeatable waveforms, and is available
for a great price.
The other guns were good too, particularly the NoiseKen but overall the EM
Test was the best value in our opinion.
Rob Kado
EMC Engineer
VWS - Auburn Hills, USA
Tel: 248-340-3828 / Fax: 248-340-3316
Internal Location 3M2
[email protected]
Sent by: [email protected]
05/11/2004 03:04 PM
Please respond to john.merrill
To: "Brian Epstein" <[email protected]>
cc: [email protected]
Subject: Re: ESD test system
Brian
We have both the Keytek MiniZap and the Schaffner NSG435
I find the Keytek slightly easier to use. However my equipment is more
sensative to the Schaffner ESD Pulse. So I prefer to test with the Schaffner.
YMMV
John Merrill
Principal Regulatory Engineer
Schneider Automation Inc.
"Brian Epstein" <[email protected]>
Sent by: [email protected]
05/11/2004 02:03 PM
Please respond to "Brian Epstein"
To: <[email protected]>
cc:
Subject: ESD test system
I am purchasing an ESD gun and am considering the following products:
Haefely PESD 1610
HV Technologies ESD3000DM1
Thermo Keytek MZ-15/EC
I would appreciate all critiques on these products.
Regards,
Brian Epstein
Sr Regulatory Compliance Engineer
Veeco Instruments
[email protected] <mailto:[email protected]>
ph (805) 967-2700 ext 2315
fx (805) 967-7717
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ieee-pses.org/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
