Brian
We have both the Keytek MiniZap and the Schaffner NSG435
I find the Keytek slightly easier to use. However my equipment is more
sensative to the Schaffner ESD Pulse. So I prefer to test with the Schaffner.
YMMV
John Merrill
Principal Regulatory Engineer
Schneider Automation Inc.
"Brian Epstein" <[email protected]>
Sent by: [email protected]
05/11/2004 02:03 PM
Please respond to "Brian Epstein"
To: <[email protected]>
cc:
Subject: ESD test system
I am purchasing an ESD gun and am considering the following products:
Haefely PESD 1610
HV Technologies ESD3000DM1
Thermo Keytek MZ-15/EC
I would appreciate all critiques on these products.
Regards,
Brian Epstein
Sr Regulatory Compliance Engineer
Veeco Instruments
[email protected] <mailto:[email protected]>
ph (805) 967-2700 ext 2315
fx (805) 967-7717
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ieee-pses.org/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
