http://www.ieee-pses.org/symposium http://www.emc2004.org/
Dear Tom, Dear John, et al, I found page 27 of this link <http://tc3.iec.ch/txt/3b257a.pdf> references Guide 51 and that the 3 signal words DANGER, WARNING and CAUTION is deleted in the new guide 51. The followings are the definitions given: “Danger - to call attention to an imminent hazard which will result in serious personal injury or death.” “Warning - to call attention to a risk; used where there is a hazard which could result in serious personal injury or death.” “Caution - to call attention to a hazard or unsafe practice which could result in minor or moderate personal injury or property damage.” Would you please confirm which guide to acquire (guide 37 or guide 51)? Thanks again for your assistance. Best Regards, Sylvia --- "T.Sato" <[email protected]> wrote: > http://www.ieee-pses.org/symposium > http://www.emc2004.org/ > -------------------------------------------------- > > On Sun, 27 Jun 2004 08:09:37 +0100, > John Woodgate <[email protected]> wrote: > > > >Is there a standard one should follow in terms of > > >defintions provided in an instruction manual for > the > > >terms NOTE, CAUTION and WARNING? > ... > > 'Caution' and 'warning' are not defined. ISO/IEC > Guide 51 may have more > > information. > > ISO/IEC Guide 37 contains definition for DANGER, > WARNING, and > CAUTION as signaling words in instructions for > consumers. > However, AFAIK, it only says that DANGER, WARNING > and CAUTION > should be used to call attention to a high, medium > and low risk. > > Regards, > Tom > > -------------------------------------------------- > Tomonori Sato <[email protected]> > URL: http://homepage3.nifty.com/tsato/ > > ------------------------------------------- > > This message is from the IEEE Product Safety > Engineering Society > emc-pstc discussion list. > > IEEE PSES Main Website: http://www.ieee-pses.org/ > > To post a message send your e-mail to > [email protected] > > Instructions for use of the list server: > > > http://listserv.ieee.org/listserv/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on > the web at: > > http://www.ieeecommunities.org/emc-pstc > __________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. IEEE PSES Main Website: http://www.ieee-pses.org/ To post a message send your e-mail to [email protected] Instructions for use of the list server: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
