Use C63.4 - 2000 or 2002 John
From: [email protected] [mailto:[email protected]] On Behalf Of Dan Anchondo Sent: Wednesday, September 15, 2004 4:11 PM To: Georgerian, Richard; emc-pstc Subject: RE: Normalised Site Attenuation Konrad and All I would look for an ANSI C63.4 1992,1994, (years may be wrong) and there is an ANSI antenna calibration publication that would be helpful but I don't remember the number. I havent had a need for a new ANSI standard but there is an ANSI C63.4 2003. This will answer a lot of dipole to doughnuts questions I believe. Regards Dan Anchondo 408-248-7001 x142 Test & Regulatory Engineer Vivotech, Inc. 451 Camino Real Santa Clara,CA 95050 From: [email protected] [mailto:[email protected]]On Behalf Of Georgerian, Richard Sent: Wednesday, September 15, 2004 3:10 PM To: emc-pstc Subject: RE: Normalised Site Attenuation Greetings All, For those who would be interested in 'why', are there any articles, journals or papers that can someone in the group can point to for some heavy reading? Richard ===== Richard Georgerian Compliance Engineer Carrier Access Corporation 5395 Pearl Parkway Boulder, CO 80301 USA Tele: 303-218-5748 Fax: 303-218-5503 mailto:[email protected] From: Pettit, Ghery [mailto:[email protected]] Sent: Wednesday, September 15, 2004 3:45 PM To: Bill Stumpf; jshinn; Konrad Stefañski; emc-pstc Subject: RE: Normalised Site Attenuation Other than launching into a dissertation of why the answer is no, there isn’t much more he could say. Ghery This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ________________________________________________________________________ _____ Scanned by Sanmina-SCI eShield ________________________________________________________________________ _____ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
