Hmmmmm... all good answers, but I interpreted the question to mean the highest frequency generated on purpose with the result expected, such as a very high frequency oscillator. Any answers on this?
At the rate of increasing speed in circuits, how long do you think it will take before circuits start to glow? That will make troubleshooting easier! :-) Doug Gourari, Alexandre wrote: > Speaking of *technically* your body sitting in a chair but actually moving > in inertial coordinate system can be considered a wave with a certain > wavelength due to quantum particle-wave paradox. De Broil discovered it > early in last century and there is a formula. Any volunteer? ;-)) > > > Alex Gourari > > > -----Original Message----- > From: Cortland Richmond [mailto:[email protected]] > Sent: Wednesday, February 02, 2005 5:10 PM > To: Chris Maxwell; INTERNET:[email protected]; Beal, Weston > Subject: RE: The technical side...with a theoretical twist > > > Chris Maxwell asked > >>>What is the highest frequency signal generated by man? What is the > > highest frequency signal measured by man? << > > I think *technically* (heh!) that would be certain emissions seen at CERN > as a result of high-energy particle/antiparticle collisions. I am exempting > the accelerated particles themselves, since they are not photons. > > Cortland > > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: http://listserv.ieee.org/listserv/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > > For policy questions, send mail to: > > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: http://listserv.ieee.org/listserv/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > > For policy questions, send mail to: > > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > -- ___ _ Doug Smith \ / ) P.O. Box 1457 ========= Los Gatos, CA 95031-1457 _ / \ / \ _ TEL/FAX: 408-356-4186/358-3799 / /\ \ ] / /\ \ Mobile: 408-858-4528 | q-----( ) | o | Email: [email protected] \ _ / ] \ _ / Web: http://www.dsmith.org This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
