Leber Jody-G19980 <[email protected]> wrote (in <[email protected]>) about 'DoC Standard Reference and More', on Wed, 13 Apr 2005: >I would like to add the following requests: > >1. Regarding Annex ZA of EN 55024 should the IEC versions of the >documents be used unless modified by "(mod)" under the document >reference, and then replaced by the appropriate EN?
You ALWAYS cite the EN. > >2. In the case of a battery (4.2 V) which New Approach Directives >should be referenced? Currently we are testing to 60950-1 and 55024. >The battery really doesn't fall under the Low Voltage Directive, and if >we only reference the EMC Directive our customers have a problem. We >have considered the RTTE Directive since the >voltage limits do not apply and the end product for the battery is RTTE >equipment. Opinions? Ideas? If the end-product is under RTTE, then you must use the RTTE. -- Regards, John Woodgate, OOO - Own Opinions Only. There are two sides to every question, except 'What is a Moebius strip?' http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
