Previously, I presented the following question: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I am trying to decide which standards should be referenced on a CE DoC with regard to EN 55024. For example, should the CE DoC reference EN 61000-4-2 and EN 61000-4-3 or the IEC versions? EN 55024: 1998 A1 references the IEC standards throughout but addresses the EN documents in Annex ZA. Annex ZA seems to indicate that only IEC documents with common modifications are to be replaced with the EN documents (61000-4-3 and CISPR 22 in this amendment). >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks for all the responses. I would like to add the following requests: 1. Regarding Annex ZA of EN 55024 should the IEC versions of the documents be used unless modified by "(mod)" under the document reference, and then replaced by the appropriate EN? 2. In the case of a battery (4.2 V) which New Approach Directives should be referenced? Currently we are testing to 60950-1 and 55024. The battery really doesn't fall under the Low Voltage Directive, and if we only reference the EMC Directive our customers have a problem. We have considered the RTTE Directive since the voltage limits do not apply and the end product for the battery is RTTE equipment. Opinions? Ideas? Best Regards,
Jody Leber Senior Regulatory Engineer [email protected] http://www.motorola.com/producttesting Motorola Product Testing Services 1700 Belle Meade Court Lawrenceville, GA 30043 770.338.3581 P 678.201.7270 C 847.761.3145 F
