Ian I would suggest you fix the problem that was indicated by the lab test results. All the differences between your set up and the test lab are factors but at some point the test lab’s result needs to be reckoned with. Failure or not.
Regards Dan Anchondo Vivotech,Inc. _____ From: [email protected] [mailto:[email protected]] On Behalf Of White, Ian Sent: Friday, December 09, 2005 1:08 AM To: IEEE Forum (E-mail) Subject: Problems with surge testing Forum Members Is there any way l can check the performance and set up of my surge signal test equipment. I use a Schaffner Best EMC working in Surge signal mode and a Schaffner CDN 117. The Schaffner has only just been calibrated but l am not getting the same results from it, that a local test house obtained while testing one of our products. Thanks for your help Ian White __________________________________________________________________________ DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the original addressee(s). Access to this message by anyone else is unauthorised. If you are not the intended original recipient(s), any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. If you have received this message in error, please immediately contact the sender by return email or telephone Spirax Sarco Ltd on +44(0)1242 521361. If you are not the intended recipient of this email and you have received it through forwarding or in error you should delete it and make no copies. We have taken all reasonable steps to protect files from viruses, but do not warrant that this e-mail and any attachments are virus free. You should take full responsibility for virus checking. Thank you. Company Reg No : 509018 Reg Office : Spirax Sarco Ltd, 130-132 St Georges Rd, Cheltenham, UK __________________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
