Hi,
I would recommend to check the pulse voltage and waveform from coupler
output with oscilloscope and differential probe that has suitable
voltage rating.
Regards,
Ari Honkala
________________________________
From: [email protected] [mailto:[email protected]] On Behalf Of
ext White, Ian
Sent: 9. joulukuuta 2005 11:08
To: IEEE Forum (E-mail)
Subject: Problems with surge testing
Forum Members
Is there any way l can check the performance and set up of my
surge signal test equipment. I use a Schaffner Best EMC working in Surge
signal mode and a Schaffner CDN 117.
The Schaffner has only just been calibrated but l am not getting
the same results from it, that a local test house obtained while
testing one of our products.
Thanks for your help
Ian White
________________________________________________________________________
__
DISCLAIMER: The information in this message is confidential and
may be
legally privileged. It is intended solely for the original
addressee(s).
Access to this message by anyone else is unauthorised. If you
are not the
intended original recipient(s), any disclosure, copying, or
distribution
of the message, or any action or omission taken by you in
reliance on it,
is prohibited and may be unlawful. If you have received this
message in
error, please immediately contact the sender by return email or
telephone
Spirax Sarco Ltd on +44(0)1242 521361. If you are not the
intended
recipient of this email and you have received it through
forwarding or in
error you should delete it and make no copies. We have taken all
reasonable steps to protect files from viruses, but do not
warrant that
this e-mail and any attachments are virus free. You should take
full
responsibility for virus checking. Thank you.
Company Reg No : 509018
Reg Office : Spirax Sarco Ltd, 130-132 St Georges Rd,
Cheltenham, UK
________________________________________________________________________
__
-
---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to
[email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald:
[email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
