Hi,
the ETSI standard you mention refers to EN 61000-4-3, not the IEC
61000-4-3.
Although there are no technical differences, there is a difference
regarding transition times you were looking for.
When Cenelec publishes 3rd Edition of 61000-4-3, it will include a dow,
a date of withdrawal of superseded standard.
Until that date both the new and old can be used, i.e. the transition
applies.
Regards,
Ari Honkala
________________________________
From: [email protected] [mailto:[email protected]] On Behalf Of
ext maddog 4030
Sent: 7. maaliskuuta 2006 20:14
To: [email protected]
Subject: RE: Transition Times for Basic Standards
Thanks to everyone for the replies.
Specifically, I am talking about the 301 489 series of standards
and the 61000-4-3 standard that was published last month.
Since 301 489-1 references 61000-4-3 and is non-specific in a
particular version and states:
"For a non-specific reference, the latest version applies."
I am guessing that it means what it says and that the date of
publication on the IEC website and the indication that it has replaced
version 2.1b, that Edition 3.0 is now the applicable version as of the
publication date.
My question regards whether or not there is some place that
specifies that there is a transition time that may apply that perhaps I
am not aware of, perhaps in some guide to applying the standards or an
ETR...
I can see how it could be a "trick questi! on" if dated or
specific versions of the standard were specified by countries or other
calling standards.
Agains, thanks for any feedback.
William
Mike Hopkins <[email protected]> wrote:
It's the European Norms, based on the IEC standards,
that have transition times............
Best Regards,
Michael Hopkins
Manager, Custom! er Technical Center
Process Instruments Division
Thermo Electron Corporation
One Lowell Research Center
Lowell, MA 01852
Tel: +1 978 275 0800 ext. 334
Mobile: +1 603 765 3736
[email protected]
www.thermo.com/esd
________________________________
From: [email protected] [mailto:[email protected]] On
Behalf Of Jon Larkin
Sent: Tuesday, March 07, 2006 12:09 PM
To: [email protected]
Subject: Fw: Transition Times for Basic Standards
There are no transition dates for IEC standards - the
latest one applies.
----- Original Message -----
From: maddog 4030 <mailto:[email protected]>
To: [email protected]
Sent: Tuesday, March 07, 2006 4:02 PM
Subject: Transition Times for Basic Standards
A Basic IEC Standard referenced in a harmonized Product
Standard is undated and the verbi! age reads
"For a non-specific reference, the latest version
applies."
Question - when the Basic Standard is indicated as
published on the IEC website, is this the effective date for use to
demonstrate compliance for the Product Standard immediately?
Or is there some sort of transition time that the
previous standard can be used to demonstrate compliance?
Cheers
William
________________________________
Yahoo! Mail
Bring photos to life! New PhotoMail
<http://pa.yahoo.com/*http://us.rd.yahoo.com/evt=39174/*http://photomail
.mail.yahoo.com> makes sharing a breeze. -
---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to
[email protected]
Instructions:
http://listserv.ieee.org/request/user-guide.html
List rule! s: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell
[email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald:
[email protected]
All emc-pstc postings are archived and searchable on the
web at:
http://www.ieeecommunities.org/emc-pstc
-
---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to
[email protected]
Instructions:
http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell
[email protected]
For policy questions, send mail to:
Jim B! acher: [email protected] David Heald:
[email protected]
All emc-pstc postings are archived and searchable on the
web at:
http://www.ieeecommunities.org/emc-pstc
-
---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to
[email protected]
Instructions:
http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell
[email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald:
[email protected]
All emc-pstc postings are archived and searchable on the
web at:
http://www.ieeecommunities.org/emc-pstc
________________________________
Yahoo! Mail
Bring photos to life! New PhotoMail
<http://pa.yahoo.com/*http://us.rd.yahoo.com/evt=39174/*http://photomail
.mail.yahoo.com> makes sharing a breeze. -
---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to
[email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald:
[email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
