In message <[email protected]>, dated Tue, 18 Jul 2006, David Gelfand <[email protected]> writes
>The new EMCD that takes effect on July 20, 2007 says that equipment for >fixed installations may not need CE marking and declaration of >conformity. The fixed installation must however meet all emc >requirements. That only applies to equipment CUSTOM-MADE for that installation and not available commercially otherwise. That's 'softened' a bit insofar as an identical CUSTOM-MADE piece of equipment may be used for another installation where its EMC characteristics are still satisfactory. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk 2006 is YMMVI- Your mileage may vary immensely. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
