Exactly. National regulators must start working on changing their rules to adopt 2004/108/EC, but it takes effect for us on 20 July 2007 and the conversion to it for all products must be complete by 20 July 2009.
Ghery S. Pettit Intel Corporation From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, January 14, 2005 6:47 AM To: [email protected] Cc: [email protected]; [email protected]; [email protected]; [email protected] Subject: RE: New EMC directive Does this mean that it doesn't apply until July 20, 2007? Regards Cecil A. Gittens Kodak EMC Test Facility 336 Initiative Drive - Rochester Technology Park Rochester, NY 14624 Telephone : (585) 726-2290 Pager : (585) 975-1874 "Carpentier Kristiaan" <Kristiaan.Carpentier@t To: <[email protected]>, <[email protected]> homson.net> cc: <[email protected]>, Sent by: <[email protected]> owner-emc-pstc@LISTSERV Subject: RE: New EMC directive .IEEE.ORG 01/04/2005 09:00 AM Bob, 2004/108 can be used from July 20th 2007. Then, there is a transition period of 2 years where you can use both 89/336 and 2004/108 till July 20th 2009. Regards, Kris From: [email protected] [mailto:[email protected]]On Behalf Of [email protected] Sent: dinsdag 4 januari 2005 14:01 To: [email protected] Cc: [email protected]; [email protected] Subject: Re: New EMC directive Does this mean that you can use either EMC Directive until 20 July 2009? Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 ======================================================================== ==================== <amund@westin-emi ssion.no> Sent by: To owner-emc-pstc@LI <[email protected]> STSERV.IEEE.ORG cc Subject 01/03/2005 04:20 New EMC directive PM The new European Union EMC directive was published in the Official Journal on 31 December 2004. Check it out here http://europa.eu.int/eur-lex/lex/LexUriServ/site/en/oj/2004/l_390/l_3902 0041 231en00240037.pdf Best regards Amund Westin, Oslo / Norway This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Mcantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Mcantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Mcantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Mcantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
