TLP is Transmission Line Pulser. With this method the signals exist in a 50
ohm enviroment and are easy to pipe to the DUT. At the DUT a 50 to 200 ohm
balun is often used.
It is a popular ESD method at the wafer level. With a TLP you can select the
risetime, current, and source impedance (not always 50 ohms). Accurate
measurement of the voltage and current waveforms is performed and a
snap-back curve can be generated.
Dave Cuthbert
From: [email protected] [mailto:[email protected]] On Behalf Of John
Woodgate
Sent: Wednesday, September 06, 2006 10:48 AM
To: [email protected]
Subject: Re: [SI-LIST] Re: Testing chips with system level specs
In message <[email protected]>, dated
Wed, 6 Sep 2006, David Cuthbert <[email protected]> writes
>I am interested in moving TLP
What is TLP? Three Letter Puzzle?
>testing to the device level. I believe that this would yield better
>testing.
This needs to be done with IEC SC447A involved, if by 'device', you mean
'integrated circuit'. The sooner those guys are involved, the easier it
will be to get agreement.
--
OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk
2006 is YMMVI- Your mileage may vary immensely.
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
