Hi John and the group, Over the last few years I have helped many clients whose chips were being subjected to IEC 62000-4-2 by their customers. The problem is almost epidemic on this side of the pond.
Doug John Woodgate wrote: > In message <[email protected]>, dated Mon, 4 Sep 2006, Doug > Smith <[email protected]> writes > >> Companies are ignoring the device standards and requiring IEC >> 61000-4-2 it be applied to devices they purchase even though not >> appropriate. The issue is not likely to go away and will have to be >> dealt with. > > > Thanks. I'll find out if it's happening in UK. -- ___ _ Doug Smith \ / ) P.O. Box 1457 ========= Los Gatos, CA 95031-1457 _ / \ / \ _ TEL/FAX: 408-356-4186/358-3799 / /\ \ ] / /\ \ Mobile: 408-858-4528 | q-----( ) | o | Email: [email protected] \ _ / ] \ _ / Web: http://www.dsmith.org - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
