I am not familiar with the SE comparisons but I do recall that trying to
ground/bond to the coatings was a problem.
Bob Heller
3M EMC Laboratory, 76-1-01
St. Paul, MN 55107-1208
Tel: 651- 778-6336
Fax: 651-778-6252
=========================
"Gordon,Ian"
<Ian.Gordon@boced
wards.com> To
Sent by: "'IEEE EMC & SAFETY PSTC'"
[email protected] <[email protected]>
cc
08/29/2006 04:22 Subject
AM Shielding effectiveness
All
We are hoping to move from metal to coated ABS enclosures for various
products as these provide a significant cost saving. Thus I would welcome
any comments as to how to ensure that the coated ABS versions are as
resilient from an EMC point of view as the metal ones.
In general is it possible to achieve the same shielding effectiveness from
a
coated ABS enclosure as from a metal one?
Ian Gordon
***********************************************************************
The information contained in this email and any attachments may be
confidential and is provided solely for the use of the intended
recipient(s). If you are not the intended recipient, you are hereby
notified that any disclosure, distribution, or use of this e-mail, its
attachments or any information contained therein is unauthorised and
prohibited. If you have received this in error, please contact the sender
immediately and delete this e-mail and any attachments.
No responsibility is accepted for any virus or defect that might arise from
opening this e-mail or attachments, whether or not it has been checked by
anti-virus software.
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
