In message 
<[email protected]>, dated 
Thu, 19 Oct 2006, Grace Lin <[email protected]> writes

>Question 1:
>
>Does an enclosure need to be CE marked for the EU market? 

No.

>My employer sells enclosures for lighting modules.   For enclosure 
>alone (such as the one at 
>http://www.crestron.com/products/show_products.asp?type=commercial&cat=1
>4&subcat=1072&id=1063), I cannot tell which Directive an enclosure 
>applies to from the list of New Approach directives
>
>http://ec.europa.eu/enterprise/newapproach/standardization/harmstds/refl
>ist.html ).
>
> 
>
>Question 2:
>
>What is the safety standard applying to a dimmer module like the one at 
>http://www.crestron.com/products/show_products.asp?type=commercial&cat=1
>4&subcat=1007&id=1077?  I assume (please correct me if I am wrong) 
>EN55015 and EN61547 are the EMC test standards.

Yes, although EN 61547 says it's for 'general purpose' lighting 
equipment, it is acceptable for dimmers in the  absence of any more 
relevant standard.

For safety, I recommend applying EN 60439-1 for the power electronics 
part, and EN 60950 for any low-power control circuits.
>
> 
>
>Question 3:
>
>IF a CE mark applies to an enclosure from Question 1 and a lighting 
>module is CE marked, can I say the lighting module(s) in an enclosure 
>is CE marked ( i.e., CE+CE=CE?).

Since there are no grounds for applying a CE mark to an enclosure, the 
question does not arise.
>
> 
>
>Question 4:
>
>Does everything selling to the Europe needs CE marked?

Definitely not.
-- 
OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk
Swine wave - a waveform whose spectrum is exceptionally difficult to calculate.
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

Reply via email to