Hi folks, 2 questions in one day: my apologies if I'm exceeding my share of bandwidth!
I'm helping a company track down what sources there may be to interfere with a short wireless data link running at 916 MHz. In our lab out of town we get almost 100% packets transmitted. In a bar in town ( were there because this is used in a bar and we were not sampling their wares, well, until we were done ), the packet success rate drops to only 60%. A SA shows little interference, but a Radio ham receiver tined to 916 MHz can pack up a strong click every second or so. The click is very loud, BUT, it does not lift the receiver squelch implying its very fast. We don't think this is local, since that signal can be received over several square miles. Anyone have suggestions as to what this could be? Thanks, -- Derek N. Walton Owner L F Research www.lfresearch.com Phone: (815) 566 5655 ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
