Hi Scott: As Brian has mentioned, the base document for rating markings is IEC 61293. This document does specify the sequence of rated values and characteristics. Best regards, Rich Richard Nute Product Safety Consultant San Diego
From: [email protected] [mailto:[email protected]] On Behalf Of Scott Xe Sent: Thursday, August 16, 2007 3:53 AM To: [email protected] Subject: Rated supply voltage & nature of supply symbol These are required in supply ratings of many safety standards. Is there any required format, i.e., rated supply voltage + nature of supply symbol, nature of supply symbol + rated supply voltage? Thanks, Scott ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
