Scott,

I believe this to be incorrect.

EN60950-1:2006 states, in Clause 1.7.8.3, Where symbols are used on or near
controls to indicate ON and OFF conditions, they shall be the line | for ON
and circle O for OFF. It is permitted to use the symbols O and | to indicate
the OFF and ON positions of any primary or secondary power switches,
including isolating switches.

Nowhere does it state that these have to be two-pole switches, but if they
are isolating switches, then they should be two-pole switches.

Best regards 

Neil R. Barker CEng MIET HonFSEE MIEEE 
Manager 
Quality Engineering 
e2v technologies (uk) ltd 
106 Waterhouse Lane 
Chelmsford 
Essex CM1 2QU 
UK 

Tel: (+44) 1245 453616 
Fax: (+44) 1245 453571 
Mob: (+44) 7801 723735 

P Please consider the environment before printing this email. 




From: Scott Xe [mailto:[email protected]]
Sent: 14 September 2007 12:05
To: [email protected]
Subject: I O power switch


I have learnt that a single pole power switch is not allowed to be marked
with | for On function and O for Off function and only double pole switch
can be used such symbol to distinguish the type of switch.  If a single pole
power switch is used, what is appropriate marking for it.  Is there any
standard to set this rule?

Thanks and regards,

Scott  

Sent by E2V TECHNOLOGIES PLC or a member of the E2V group of companies. A
company registered in England and Wales. Company number: 04439718.
Registered address: 106 Waterhouse Lane, Chelmsford, Essex, CM1 2QU, UK.

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           [email protected]
     Mike Cantwell           [email protected]

For policy questions, send mail to:

     Jim Bacher:             [email protected]
     David Heald:            [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

Reply via email to