Dear Members, I have two questions and appreciate your inputs: 1. Is there any clearance distance/requirement between an EFT generator and a capacitive coupling clamp (ccc)? 2. Is there any clearance distance/requirement between EUT and a capacitive coupling clamp (CCC)? From Figure 1 of IEC 61000-4-4, the cable length between the capacitive coupling clamp and the EUT "should be 0.5m +/- 0.05m". Does this mean the distance between EUT and CCC should also be 0.5m? We built a 4ft x 8ft table with the same size of metal sheet (reference to ground reference) on top of it. I would like to place an EFT generator, CCC, and EUT on top of the table. Thank you for your time and look forward to your help. Best regards, Grace Lin - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
