Hello to the group, Are requirements for UL/CSA and Japanese PSE Marked power supply cord sets mutually exclusive? I've been trying to find a cord set that would satisfy both North American and Japanese requirements for a plain vanilla NEMA 5-15 plug to C13 configuration. I checked the major international cord set vendors in the US and can't find a single one. They look the same visually but there must be some technical requirement that makes it difficult or impossible to do both? Is it a wire or plug issue? Thanks in advance.
-- Dan Roman, N.C.E. Regulatory Engineer Dialogic, Inc. 1515 State Rt. 10 Parsippany, NJ 07054-4538 *mailto:[email protected] <mailto:[email protected]> *Voice: +1 973-967-6485 Fax: +1 973-967-6262 Intranet: http://compliance.eicon.com/ <http://compliance.py.intel.com/> Internet: http://www.dialogic.com <http //www.intel.com/design/network/products/telecom/index.htm> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
