Hi Wendy, I think the only question would be if your total system with attached peripherals and allowed support devices is larger than the 10x10x10cm number. If your device has no I/Os and is of those dimensions, tell the auditor to go pound sand.
Brent DeWitt Milford, MA > -----Original Message----- > From: WNya [mailto:[email protected]] > Sent: Monday, October 10, 2011 11:54 PM > To: [email protected] > Subject: [PSES] Table Size in Emissions test > > Dear Experts, > Recently my company went through the first ISO17025 audit. We have a > table smaller than the standard requirement of 1.5m x 1m since our > products are small, typically 10cm x 10cm x 10cm. The height of our > table was 0.8m. The auditor wanted us to change the table size to > follow the standard. > What does it matter since we never use the extra space on the table? I > do agree we must keep to the height requirement since the floor is a > ground plane and thus it sets a fixed capacitance to the EUT and also > controls the lengths of any attached cables. > > Can we reject or challenge the auditor's request? Has anyone experience > the same situation? > > Sent from Wendy.Nya iPhone > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc- > pstc discussion list. To post a message to the list, send your e-mail > to <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://product-compliance.oc.ieee.org/ > Graphics (in well-used formats), large files, etc. can be posted to > that URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
