The option a is also acceptable in some standards such as GR-1089-CORE. For each frequency step; The modulation has to be turned off, adjust the level, apply modulation… It is quite time consuming
Again, this method is not for EN 61000-4-3 Deniz On Tue, Sep 27, 2011 at 3:59 AM, Ian White (UK) <[email protected]> wrote: Could you please help: Could you explain what is the correct procedure when using an anechoic chamber which is calibrated and operating to EN61000-4-3. During calibration of the chamber, a calibration file is made and it is assessed according to the guidelines laid down under BS EN61000-4-3. During calibration the chamber is empty. During a normal test run a UUT is put into the chamber. The questions is : a) Do you use the calibration file as the starting point and adjust the field strength which may have changed due to the UUT being in the chamber. b) Just take the calibration file and run it and except the filed strengths would have changed due to the UUT being in the chamber. Thanks Ian White Compliance and Reliability. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
