Hi Jim, First. Get the conflict of interest warning out of the way...
Second. Almost everything you need answers to are one of the reasons we set up EMC LAB Services. Suggest you contact Wally Pilat there. I'm still using my 8566 SA's. As yet they still do everything I need. I had the collie conversion done, very nice too. As for R&S. Well I think of them like BMW's. All image.... Very expensive image... There are options from Agilent, Teseq etc that are far better in North America. Cheers. Derek Walton L f research Sent from my iPhone On Feb 14, 2011, at 5:15 PM, [email protected] wrote: Hi everyone: We are about to move (groan) and while this generally is a pain, it provides the opportunity to fix a few problems along the way. Our 3m SAC is usable, and indeed gets fairly heavy use, but is not as good as I think it could be, in a few ways: - Our emissions measurement correlation to "real" labs is OK but could be better, particularly on conducted emissions - Our aging HP rack (the classic 856x series) is getting old and is starting to be costly to maintain - time to switch? - We have always just had a manual turntable and would like to see what's involved in going with a motorized turntable and controller - We have aging cones, many with broken tips - maybe not an issue, but maybe it is? - We haven't researched what it would take to go past 1GHz with our RE measurements, but we need to - Etc. I think it would be worthwhile to have someone who is an expert in design and troubleshooting of SAC's and EMC instrumentation come here, give us a once-over, make recommendations for improvements that we could implement as part of the move, and perhaps participate in the teardown and relocation of the chamber (not as simple as it sounds) or recommend someone who could. If you are interested and qualified, or know someone who is, please reply to me off-line at [email protected]. I would prefer somebody at least somewhat local - we are in the Vancouver BC area. Thanks, Jim _____________________________________________________________________________________ Jim Eichner | Schneider Electric | Renewable Energies Business | CANADA | Compliance Engineering Manager Site: www.schneider-electric.com/renewable-energies <http://www.schneider-electric.com/renewable-energies> | Address: 8999 Nelson Way, Burnaby, BC, V5A 4B5 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < <mailto:[email protected]> [email protected]> All emc-pstc postings are archived and searchable on the web at <http://product-compliance.oc.ieee.org/> http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: <http://www.ieee-pses.org/> http://www.ieee-pses.org/ Instructions: <http://listserv.ieee.org/request/user-guide.html> http://listserv.ieee.org/request/user-guide.html List rules: <http://www.ieee-pses.org/listrules.html> http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas < <mailto:[email protected]> [email protected]> Mike Cantwell < <mailto:[email protected]> [email protected]> For policy questions, send mail to: Jim Bacher < <mailto:[email protected]> [email protected]> David Heald < <mailto:[email protected]> [email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
