Thanks Robert, read through your link, updated my notes.
I probably didn’t have any data for HK since my rep has previously indicated no approval necessary, everything we’ve shipped there is on the exempt list, but obviously not universally the case. ________________________________ From: Rudd, Adam Sent: Friday, January 28, 2011 12:44 PM To: [email protected] Subject: Re: [PSES] RFID in Macau/HongKong Notes I have for those two nations: Hong Kong Special Administrative Region of China OFTA (Office of the Telecommunications Authority) Type Approval “Voluntary Certification Scheme” (VCS) or the “Compulsory Certification Scheme” (CCS). Radio equipment classified under the CCS must be granted a type-approval before it can be offered for sale in Hong Kong. Devices classified under the VCS can be used or marketed in Hong Kong without obtaining type-approval. Type-approval can be obtained on a voluntary basis. See Order I402 exemptions. Type-approval acceptance can be based on a review of test reports issued by foreign accredited laboratory using equivalent standards. Apply via in-country Local Certified Body (LCB) OFTA: http://www.ofta.gov.hk/en/index.html LCBs: http://www.ofta.gov.hk/en/tec/lcb.html Exemptions; Order I402: www.ofta.gov.hk/en/tec/information-notes/in402.pdf 2.4 GHz and 5 GHz 802.11b/g and other wireless LAN products HKTA 1039 TDMA mobile telephone HKTA 1029 CDMA mobile telephone HKTA 1031 GSM / PCS mobile telephone HKTA 1033 3G mobile telephone HKTA 1048; HKTA 1054 RFID equipment HKTA 1049; HKTA 1051 Macao Special Administrative Region of China DSRT (Telecommunication Regulation Services Directorate) Type Approval and License Required for sale or use. Based on international foreign standards Exemptions for common low power devices Yes DSRT: http://www.dsrt.gov.mo/ Despacho do Chefe do Executivo 318/2006 http://www.dsrt.gov.mo/por/laws/318_2006.html 1.7 802.11 2400-2483.5 MHz 100 mW ……………….5725-5850 MHz 100 mW 1.11 RFID 13.553-13.567 MHz 1 W Adam Rudd EMC Engineer NCR Corporation phone: 770.495.2825 [email protected] <mailto:[email protected]> | www.ncr.com <http://www.ncr.com/> ________________________________ From: Mike Violette [mailto:[email protected]] Sent: Friday, January 28, 2011 6:59 AM To: [email protected] Subject: Re: [PSES] RFID in Macau/HongKong Hi Aboo, For Hong Kong, the certification is not mandatory. It is difficult to find any RF device that needs to have a formal certification, except, I believe broadcast transmitters and perhaps cell base stations. I copy Mr. Lawrence Kwan who is with Hong Kong OFTA. There are certification bodies that can assess your device to the requirements as Hong Kong and the US have an MRA under the APEC TEL arrangement. http://www.apec.org/en/Press/Features/2 10/0906_Fostering_International_Trade_Ten_Years_of_MRA_Success.aspx Mike Violette [email protected] Washington Laboratories Radio Frequency and Electrical Safety 301 216-1500 cell: 240 401 1388 ________________________________ From: Aboo [mailto:[email protected]] Sent: Thursday, January 27, 2011 9:09 PM To: [email protected] Subject: [PSES] RFID in Macau/HongKong Dear Experts, Is there any radio requirement for RFID products in Macau/HongKong(as FCC in US)? Thanks Regards, Aboo. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
