In message <004801cb53e3$8c966820$a5c33860$@no>, dated Tue, 14 Sep 2010, Amund Westin <[email protected]> writes:
>Is it possible to make use of a CB certificated (IEC 60601-1) PSU, into >a ITE which shall be approved according to IEC60950-1? > >Well, I assume that's OK, but should we expect additional tests on the >PSU / ITE since it's not CB acc to IEC60950-1? Compare the requirements of the two standards. You will need to have any tests that are not in 60601-1 but are in 60950-1 carried out. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK If at first you don't succeed, delegate. But I support unbloated email http://www.asciiribbon.org/ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
