What about copper tape with conductive adhesive? I would think the adhesive would protect the metal if this is a pressure point (say cover screws maybe?).
Scott Douglas Ernest Rayman wrote: > We had en enclosure built and the sheet metal people powder coated every metal to metal contact surface. > We have had a couple of systems misbehave in the field and it is an immunity issue. > > We have scraped all the powder coating off the metal to metal mating surfaces but we do not like the bare metal because it will eventually start to rust. > I have looked into a couple of conductive paints that we can use but the lead engineer has expressed a distrust and dislike of conductive paints. > > I am looking for suggestions about what conductive paint you have used with success and if there are other options for rust control this late in the game. > > Thank you for all your help and Happy Holidays to everybody, > Ernest Rayman > > _________________________________________________________________ > Hotmail: Trusted email with powerful SPAM protection. > http://clk.atdmt.com/GBL/go/177141665/direct/01/ > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > Graphics (in well-used formats), large files, etc. can be posted to that URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> > > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
