I have used "Galvafroid" on steel. It is a paint that uses a high content of colloidal zinc particles in the paint. It works best as a seal when the parts are assembled while the paint is still tacky. Any other form of high metal content paint should also work well.
I have also used "Copper Slip" grease with high content of copper particles in the grease. This works well for sealing shafts in the door handles of some screened room doors. The information is a little old - there may be better solutions around today. Regards Tim ************************ Tim Haynes A1N10 Electromagnetic Engineering Specialist SELEX Sensors and Airborne Systems 300 Capability Green Luton LU1 3PG ( Tel : +44 (0)1582 886239 7 Fax : +44 (0)1582 795863 ) Mob : +44 (0)7703 559 310 * E-mail : tim.hay...@selexgalileo.com P Please consider the environment before printing this email. There are 10 types of people in the world-those who understand binary and those who don't. J. Paxman From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Ernest Rayman Sent: 17 December 2009 14:06 To: emc-p...@ieee.org Subject: Conductive Paint *** WARNING *** This message has originated outside your organisation, either from an external partner or the Global Internet. Keep this in mind if you answer this message. We had en enclosure built and the sheet metal people powder coated every metal to metal contact surface. We have had a couple of systems misbehave in the field and it is an immunity issue. We have scraped all the powder coating off the metal to metal mating surfaces but we do not like the bare metal because it will eventually start to rust. I have looked into a couple of conductive paints that we can use but the lead engineer has expressed a distrust and dislike of conductive paints. I am looking for suggestions about what conductive paint you have used with success and if there are other options for rust control this late in the game. Thank you for all your help and Happy Holidays to everybody, Ernest Rayman _________________________________________________________________ Hotmail: Trusted email with powerful SPAM protection. http://clk.atdmt.com/GBL/go/177141665/direct/01/ - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@socal.rr.com> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> SELEX Sensors and Airborne Systems Limited Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL A company registered in England & Wales. Company no. 02426132 ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ******************************************************************** - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@socal.rr.com> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>