We had en enclosure built and the sheet metal people powder coated every metal
to metal contact surface.
We have had a couple of systems misbehave in the field and it is an immunity
issue.
We have scraped all the powder coating off the metal to metal mating surfaces
but we do not like the bare metal because it will eventually start to rust.
I have looked into a couple of conductive paints that we can use but the lead
engineer has expressed a distrust and dislike of conductive paints.
I am looking for suggestions about what conductive paint you have used with
success and if there are other options for rust control this late in the game.
Thank you for all your help and Happy Holidays to everybody,
Ernest Rayman
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141665/direct/01/
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that URL.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
