IEEE membership in general has been a great career resource for me and I
do not (and will not) hesitate to renew membership.  Society memberships
have come and gone based on my interests and area of industry in which I
have worked (Consumer Electronics, Antenna, DSP, EMC, Communication).  

As users of this forum, if half of us were PSES members that should
cover the numbers.  There are expenses associated with a society and if
there is little interest the society should be reexamined.  Interest as
gauged by membership numbers.  1000 seems a little high to me, but in a
global organization like IEEE it may be reasonable.      

The bigger question (and one for the PSES society board), is there
enough interest in a PSES?  Would the global community be better served
if there was no PSES?  

My opinion is that the community is better served by having a PSES and
as such I will be adding that Society (along with EMC) to my renewal
list.

Best regards,
Doug Kramer



From: [email protected] [mailto:[email protected]] On Behalf Of Jim
Bacher
Sent: Thursday, July 23, 2009 9:01 PM
To: [email protected]
Subject: IEEE PSES / Please Read

Dear emc-pstc Member:

We wanted to make you aware of our need to increase PSES membership 
by the end of this
year. If we do not increase membership from 600 members to at least 
1000 members by the
end of the year, there will be a movement to shut down the Product 
Safety Engineering
Society in 2010. I feel the society is too important to just throw up 
our hands and
give it up.  If you have been a member of this email discussion list 
for any amount
of time you know how valuable the list is. Even though the list will 
not go away if
the society goes away, I do not want to allow the society to fail.

To join only the society (not be a member of the IEEE) you may join 
as an affiliate.
The cost is approximately half of what a full member of the IEEE 
would cost. To join
go to:
   http://www.ieee.org/web/membership/societies/PSE043.html

Affiliate part of the Dues are show below. Add on the society fee (to 
the amount show
below) of $35 for full year (after August 16) or $17.25 for a half year.

                                Full Rate       Half year rate

     IEEE Regions 1-6 (USA)     64.50           32.25

     IEEE Region 8-10           64.50           32.25

     IEEE Region 7, GST         67.73           33.87

     IEEE Region 7, HST         72.89           36.45

Region info available at: 
http://www.ieee.org/web/geo_activities/home/world_reg.html
Why be a member information at: http://www.ieee-pses.org/membership.html


Thank You,

Jim Bacher
President IEEE PSES
http://www.ieee-pses.org
http://www.psessymposium.org/

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. To post a message to the list, send your
e-mail to <[email protected]>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that
URL.

Website:  http://www.ieee-pses.org/
Instructions:  http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>

For policy questions, send mail to:
Jim Bacher:  <[email protected]>
David Heald: <[email protected]>

-

This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that URL.

Website:  http://www.ieee-pses.org/
Instructions:  http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>

For policy questions, send mail to:
Jim Bacher:  <[email protected]>
David Heald: <[email protected]>

Reply via email to