Consider a product that is intended to be connected to mains power via a non- detachable power cord that is fed into the equipment through a cable gland (compression bushing) fitted to the equipment enclosure. Neither the power cord or the cable gland are supplied by the manufacturer and the specific parts to be used are the responsibility of the installer, taking into account the general safety requirements included in the equipment manual, the local safety regulations covering the installation and availability of parts.
Given that no power cable or cable gland is shipped with the product, for the equipment to be approved under IEC/EN 61010-1 Ed.3 are the requirements of Clause 6.10.2.2 Cord anchorage applicable?
Many thanks in anticipation of your responses.
Ian Unwin
---- Servomex company information and outgoing e-mail advice. ----
Servomex Group Limited, Jarvis Brook, Crowborough, East Sussex, TN6 3FB, England.
e-mail: [email protected]
Company Registered in England: No.2170458
VAT No.: GB 522 6077 63
EXPORT CONTROL INFORMATION: Resale, onward shipment or diversion of Servomex products to embargoed destinations including but not limited to Iran, Syria, Sudan and North Korea is strictly prohibited.
This email has been scanned for all viruses by MessageLabs and contains information from Servomex which may be privileged or confidential. The information is intended to be for the use of the individual(s) or entity named above. If you are not the intended recipient be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us immediately. Servomex may, as part of its normal activities, monitor, edit or censor the content of any information and software, transmitted through, or stored on, its facilities. -
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]>
