In message <cca44ad4.2f74e%[email protected]>, dated Wed, 17
Oct 2012, Ken Javor <[email protected]> writes:
What is arbitrary and capricious about setting EMI limits just below a
level that provides a minimum quality standard?
I suspect it's the assumption about receiver sensitivity. If I remember
correctly, British AM broadcast receivers (when this sort of information
was available) had a range of about 30 dB in sensitivity. Roughly
corresponds to whether there was an RF amplifier or not.
--
OOO - Own Opinions Only. See www.jmwa.demon.co.uk
The longer it takes to make a point, the more obtuse it proves to be.
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
