The "relief" is related to Pulse Repetition Frequency. Once the PRF is greater than 100 Hz => no relief, only aspirin will do.
Mike Violette Washington Laboratories & American Certification Body [email protected] +1 240 401 1388 On Nov 27, 2012, at 6:44 PM, Derek Walton wrote: > Sure this isn't power over Ethernet power supply? > > Sent from my iPad > > On Nov 27, 2012, at 14:55, Ken Javor <[email protected]> wrote: > >> Performing troubleshoot testing to CISPR type radiated emissions >> requirements without a quasi-peak detector. Seeing results of bus traffic >> on an Ethernet cable. Squeezing down to zero-span mode and adjusting sweep >> speed, a roughly 500 us 50% duty cycle waveform is observed. >> >> Is it accurate to expect no “relief” during a full qualification testing >> using a quasi-peak detector for this type of intermittent signal? >> >> Thank you, >> >> Ken Javor >> Phone: (256) 650-5261 >> - >> ---------------------------------------------------------------- >> This message is from the IEEE Product Safety Engineering Society emc-pstc >> discussion list. To post a message to the list, send your e-mail to >> <[email protected]> >> >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieee-pses.org/emc-pstc.html >> >> Attachments are not permitted but the IEEE PSES Online Communities site at >> http://product-compliance.oc.ieee.org/ can be used for graphics (in >> well-used formats), large files, etc. >> >> Website: http://www.ieee-pses.org/ >> Instructions: http://listserv.ieee.org/request/user-guide.html >> List rules: http://www.ieee-pses.org/listrules.html >> >> For help, send mail to the list administrators: >> Scott Douglas <[email protected]> >> Mike Cantwell <[email protected]> >> >> For policy questions, send mail to: >> Jim Bacher <[email protected]> >> David Heald <[email protected]> >> > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
