Yes, except those in the Restricted bands.

A certification is necessary for any intentional emitter.

ยง 15.205   Restricted bands of operation.
(a) Except as shown in paragraph (d) of this section, only spurious emissions 
are permitted in any of the frequency bands listed below:

MHz     MHz     MHz     GHz
0.090-0.110     16.42-16.423    399.9-410       4.5-5.15
1 0.495-0.505   16.69475-16.69525       608-614 5.35-5.46
2.1735-2.1905   16.80425-16.80475       960-1240        7.25-7.75
4.125-4.128     25.5-25.67      1300-1427       8.025-8.5
4.17725-4.17775 37.5-38.25      1435-1626.5     9.0-9.2
4.20725-4.20775 73-74.6 1645.5-1646.5   9.3-9.5
6.215-6.218     74.8-75.2       1660-1710       10.6-12.7
6.26775-6.26825 108-121.94      1718.8-1722.2   13.25-13.4
6.31175-6.31225 123-138 2200-2300       14.47-14.5
8.291-8.294     149.9-150.05    2310-2390       15.35-16.2
8.362-8.366     156.52475-156.52525     2483.5-2500     17.7-21.4
8.37625-8.38675 156.7-156.9     2690-2900       22.01-23.12
8.41425-8.41475 162.0125-167.17 3260-3267       23.6-24.0
12.29-12.293    167.72-173.2    3332-3339       31.2-31.8
12.51975-12.52025       240-285 3345.8-3358     36.43-36.5
12.57675-12.57725       322-335.4       3600-4400       (2)
13.36-13.41                     
1 Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz.

Mike Violette
Washington Laboratories & American Certification Body
[email protected]
+1 240 401 1388



On Mar 14, 2013, at 10:27 AM, Paasche, Dieter wrote:

> Can I use any frequency if my transmission level is below the class B limit? 
> 
> Sincerely, 
> 
> Dieter Paasche x7211
> 
> 
> -----Original Message-----
> From: Thomas Cokenias [mailto:[email protected]] 
> Sent: March 12, 2013 5:30 PM
> To: [email protected]
> Subject: Re: [PSES] FCC and very low-power wireless devices
> 
> Hi John
> 
> Section 15.209 has general requirements for radiated emissions for 
> intentional radiators (transmitters).  At these frequencies you would be 
> allowed 200 uV/m at 3m, not much but you aren't allowed higher power until 
> you get to 902-928 MHz band.
> 
> best regards
> 
> Tom
> 
> On Mar 12, 2013, at 12:28 PM, John Woodgate wrote:
> 
>> Does the FCC allow very low power wireless devices (transmitting speech for 
>> assisted hearing for disabled people) to operate on 863 MHz or nearby?
>> --
>> OOO - Own Opinions Only. See www.jmwa.demon.co.uk SHOCK HORROR! 
>> Dinosaur-like DNA found in chicken and turkey meals John Woodgate, J M 
>> Woodgate and Associates, Rayleigh, Essex UK
>> 
>> -
>> ----------------------------------------------------------------
>> This message is from the IEEE Product Safety Engineering Society 
>> emc-pstc discussion list. To post a message to the list, send your 
>> e-mail to <[email protected]>
>> 
>> All emc-pstc postings are archived and searchable on the web at:
>> http://www.ieee-pses.org/emc-pstc.html
>> 
>> Attachments are not permitted but the IEEE PSES Online Communities site at 
>> http://product-compliance.oc.ieee.org/ can be used for graphics (in 
>> well-used formats), large files, etc.
>> 
>> Website:  http://www.ieee-pses.org/
>> Instructions:  http://listserv.ieee.org/request/user-guide.html
>> List rules: http://www.ieee-pses.org/listrules.html
>> 
>> For help, send mail to the list administrators:
>> Scott Douglas <[email protected]> Mike Cantwell 
>> <[email protected]>
>> 
>> For policy questions, send mail to:
>> Jim Bacher:  <[email protected]>
>> David Heald: <[email protected]>
> 
> -
> ----------------------------------------------------------------
> This message is from the IEEE Product Safety Engineering Society emc-pstc 
> discussion list. To post a message to the list, send your e-mail to 
> <[email protected]>
> 
> All emc-pstc postings are archived and searchable on the web at:
> http://www.ieee-pses.org/emc-pstc.html
> 
> Attachments are not permitted but the IEEE PSES Online Communities site at 
> http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
> formats), large files, etc.
> 
> Website:  http://www.ieee-pses.org/
> Instructions:  http://listserv.ieee.org/request/user-guide.html
> List rules: http://www.ieee-pses.org/listrules.html
> 
> For help, send mail to the list administrators:
> Scott Douglas <[email protected]>
> Mike Cantwell <[email protected]>
> 
> For policy questions, send mail to:
> Jim Bacher:  <[email protected]>
> David Heald: <[email protected]>
> 
> -
> ----------------------------------------------------------------
> This message is from the IEEE Product Safety Engineering Society emc-pstc 
> discussion list. To post a message to the list, send your e-mail to 
> <[email protected]>
> 
> All emc-pstc postings are archived and searchable on the web at:
> http://www.ieee-pses.org/emc-pstc.html
> 
> Attachments are not permitted but the IEEE PSES Online Communities site at 
> http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
> formats), large files, etc.
> 
> Website:  http://www.ieee-pses.org/
> Instructions:  http://listserv.ieee.org/request/user-guide.html
> List rules: http://www.ieee-pses.org/listrules.html
> 
> For help, send mail to the list administrators:
> Scott Douglas <[email protected]>
> Mike Cantwell <[email protected]>
> 
> For policy questions, send mail to:
> Jim Bacher:  <[email protected]>
> David Heald: <[email protected]>

-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<[email protected]>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website:  http://www.ieee-pses.org/
Instructions:  http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>

For policy questions, send mail to:
Jim Bacher:  <[email protected]>
David Heald: <[email protected]>

Reply via email to