In message <[email protected]>, dated Tue, 26 Mar 2013, Richard
Nute <[email protected]> writes:
Solvent action (if it is not water) on a label is similar (likely more
severe) to the specified hexane. If the label passes with turpentine
or paint thinner, it is likely to pass with hexane.
I agree, but using the wrong stuff is formally not applying the
standard.
(In the U.S.A., paint thinner WOULD NOT be carbon tet!)
Also in Europe, I think, but it was in use within living memory for
resin lacquers, and I still have some! And in this particular
application, (small amount, very infrequent), it would not be much of a
problem, except that it might dissolve the whole enclosure!
OT Note: I read on the label of my 'label remover spray' about the
hazards of limonene, and the next day read that there is some in my
toothpaste!
--
OOO - Own Opinions Only. See www.jmwa.demon.co.uk
SHOCK HORROR! Dinosaur-like DNA found in chicken and turkey meals
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
