In message
<64D32EE8B9CBDD44963ACB076A5F6ABB0265E05F@Mailbox-Tech.lecotech.local>,
dated Thu, 25 Jul 2013, "Kunde, Brian" <[email protected]> writes:
That makes sense. Is this why molded plugs for Medical Devices are made
from clear material? So it can be visually inspected?
I think so, but don't count on it. When moulded plugs were first
introduced there was a serious reliability problem, with melting, sparks
and smoke. Moulding techniques had to be considerably refined. I think a
two-step process is used, with a visual inspection between the steps.
--
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
Why is the stapler always empty just when you want it?
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
