Truth from the lab. When January 12, 2014 rolls around any product you place on the market in the EU to which EN 61000-6-4 applies will have to have been shown to meet the standard with amendment A1:2011. Now, you need to know what the amendment changed. I don't know your product, nor do I know the amendment (the generic standards don't apply to our products), so you'll have to look and see what changed. Sometimes the changes have no impact on your product, so a simple update to the test report is all that is needed. Sometimes life isn't so simple.
Ghery S. Pettit From: [email protected] [mailto:[email protected]] On Behalf Of Crane, Lauren Sent: Friday, August 30, 2013 1:05 PM To: [email protected] Subject: Retest because of supersded standard? Dear Experts, A test lab is suggesting that because EN61000-6-4:2007 will be superseded in 2014, all conforming products must be retested to the new standard, even if no changes have occurred in the product. Is this a fair claim? Regards, Lauren Crane KLA-Tencor - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
