No John, no jail for me..... Being/Owning a test house I am officially allowed to put into service non-tested equipment, and even non compliant equipment without any restriction....
Regards, Ing. Gert Gremmen, BSc [email protected] www.cetest.nl Kiotoweg 363 3047 BG Rotterdam T 31(0)104152426 F 31(0)104154953 Before printing, think about the environment. -----Oorspronkelijk bericht----- Van: John Woodgate [mailto:[email protected]] Verzonden: Tuesday, October 29, 2013 2:49 PM Aan: [email protected] Onderwerp: Re: [PSES] EMC requirements for developer/evaluation boards In message <[email protected]>, dated Tue, 29 Oct 2013, "ce-test, qualified testing bv - Gert Gremmen" <[email protected]> writes: >I think the real reason for this exception going unnoticed is simply >because they are shipped in small quantities (1 at a time). I now and >then buy Ebay stuff from the far-east without any ce marking and it >arrives always, in spite of clearly not being tested/ce marked or >compliant. Go directly to jail. Do not collect 200 Euros.(;-) I have taken steps to try to get the matter properly resolved, by adopting in the EMCD the words from RoHS II quoted here, but I am not in a position to give details. -- OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk If dictionaries were correct, we would only need one, because they would all give the same information. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
